LED Lighting Fixtures You Should Consider for Industry
Industry consumes an enormous amount of energy. Therefore, and as you might expect, these structures are expensive to operate. Having the lights on is a vital part of your facility’s cost of operations. Moreover, you may be spending and paying for much higher than you need to if you’re using traditional lighting fixtures. Luckily, there has never been a more significant time to look for new energy, effective lighting solutions. LED Lighting is revolutionizing the landscape and is available in all of the most generally used fixtures in commercial buildings.
However, First, Why Should Commercial Facilities Consider LED Lighting Fixtures?
LED Lighting Fixtures are instantly making alternative types of lighting out-of-date. There are three reasons for this change: reduced maintenance, energy efficiency, and better light quality. Let’s look at every a little closer:
- Reduced maintenance cost: Drastically decrease maintenance costs by utilizing LED lighting fixtures and lamps for an industry that has from four to forty times the valuable service life of legacy commercial lighting. Because industrial departments are so large that there is usually a lot of waste product, including disposal issues to consider. Developing an LED conversion or retrofit will help reduce waste disposal issues by transitioning from High-Intensity Discharge lamps to newer, more reliable technology. Thus the installation costs tend to be higher with LED Lighting Fixtures; the long lifespan gives up for this several times over. In that way, purchasing LED lighting is an investment. Along with the more extended lifespan typically becomes a more prolonged product guarantee (warranty), furthermore significantly reduced maintenance expenses and hassle.
- Energy efficiency: Retrofitting your modern industrial lighting with an energy-efficient LED Lighting solution can save up to 80% in your energy costs. The savings are so important that you can finance the replacement with the energy cost savings you will receive as a result. For example, a fluorescent light usually used in commercial lighting applications installed on the ceiling will beam light for 360 degrees, including worthless emissions into the roof itself. Some of this light can be redirected and reflected, but most of it is lost, means that the energy used to produce it is wasted. This light will have high luminous efficacy. (total light emitted) However, lower useful lumens and foot-candles (whole light emitted in the desired target area). A LED Lighting emits light 180 degrees means there is no waste of energy while directing light to the ceiling instead of the target area of the room is illuminated. The view that better addresses its directional emissions will have a higher measure for useful lumens. Because LED Lightings are directional, they will surpass the efficiency of an equally capable omnidirectional (360 degree) light, which makes them high fixtures for industrial lighting.
- Lighting quality and performance: LED Lighting emits much higher quality Light than traditional lighting solutions for two primary reasons. First, the way that things are revealed when subjected to LED discharges is very close to natural light; LED lighting has a very higher CRI. For example, grass will look green at night under LED Lighting, but dull or yellowish under HPS Lights. Second, the volume of light that hits the target area is likely to be significantly higher for a given potential rating than it will be with practically any other view. In simple words, the area you care about will receive all of the light!
LED Warehouse Lighting: What is the best-LED product for my Application?
- High Bay LED Lighting Fixtures are usually used in the warehouse which has ceilings nearly 25 ft and more elevated. They are used to light both vertical and horizontal working planes also can be used with a variety of reflectors. Typically, High Bay LED lighting fixtures have used metal halide bulbs or fluorescent bulbs in the past. While certain types of industrial LED lighting have their advantages, High Bay LED lighting fixtures will outperform metal halides and fluorescents in essential ways.
- Low Bay LED Lighting Fixtures are used in warehouses and other commercial facilities where both mounting height and ceilings are low. High bay lights are not suitable in these buildings because they may not spread light properly. Like high bays, Low Bay LED lighting fixtures also typically use metal halide and fluorescent bulbs. However, both are quickly losing ground to LED warehouse lighting fixtures.
- Linear LED Strip Lights are an excellent fit for essential places like grocery stores or department stores. Some of their benefits constitute a cleaner look and a smaller footprint. When you consider linear LED strip lights for commercial spaces, there is also a lower energy footprint as well. Historically, T8 and T12 light fixtures have been used when strip lighting is required.
- Recessed Troffer LED lights comes in three sizes: 2’ x 4’, 1’ x 4’, and 2’ x 2’. Conventional Troffer fixtures often include T8 and T12 Fluorescent lamps, ranging from 2-4 lamps per fixture. They can be pendant mounted, chain-hung and surface mounted. LED Troffer solutions can consist of LED Linear Tube retrofits, or LED installations, with the best choice depending on existing working conditions. Troffer applications are in a variety of Industrial buildings and Warehouse facilities. Whether you choose surface-mounted or recessed depends on desired light performance and ceiling fit.
